News & Events
DUNGS MBE GasMultiBloc® - Successful conversion from DUNGS GasMultiBloc® MBC to MBE.
May 19, 2022
View Full Size
The MBE multifunctional control combines the housing with two safety shutoff valves (ValveBody) and two electronic drives (ValveDrive) to actuate the safety valves and, optionally, to control the outlet pressure.
• 2 safety shutoff valves acc. EN 161
• Maximum inlet pressure of up to 70 kPa (700 mbar)
• Voltages: 100-240 VAC & 24 VDC
• Regulator function as per EN 88-1 & EN 88-3
• 3 sensors (PS) cover the outlet pressure range of (0-50 kPa)
• High flow rate with low pressure loss
• Biogas tested to max. 1.0 vol. % H2S
• Modular system
• Simple assembly
• Lightweight design
• Worldwide approvals
The following models are available:
• VD-V-(AC/DC)
Open/close valve drive
• VD-R-(AC/DC)
Open/close valve drive with pressure regulation function
• VD-(V/R)-(AC/DC)-POC
Open/close valve drive with optional pressure regulation function and integrated closed position indicator switch
CONTACT LSA FOR MORE DETAILS
• 2 safety shutoff valves acc. EN 161
• Maximum inlet pressure of up to 70 kPa (700 mbar)
• Voltages: 100-240 VAC & 24 VDC
• Regulator function as per EN 88-1 & EN 88-3
• 3 sensors (PS) cover the outlet pressure range of (0-50 kPa)
• High flow rate with low pressure loss
• Biogas tested to max. 1.0 vol. % H2S
• Modular system
• Simple assembly
• Lightweight design
• Worldwide approvals
The following models are available:
• VD-V-(AC/DC)
Open/close valve drive
• VD-R-(AC/DC)
Open/close valve drive with pressure regulation function
• VD-(V/R)-(AC/DC)-POC
Open/close valve drive with optional pressure regulation function and integrated closed position indicator switch
CONTACT LSA FOR MORE DETAILS
DUNGS MPA4112 V1.1 Automatic Burner Control
Mar 12, 2022
View Full Size
Microprocessor-controlled automatic gas burner control for intermittent and continuous operation of one-stage atmospheric burners or one-stage or modulating fanned burners. The program sequence and times can be customised by setting software parameters
Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
FM Approved to FM 761
UL Recognized Component per UL 372, UL 1998 and CSA C22.2. GOST / Rostechnadzor
Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
FM Approved to FM 761
UL Recognized Component per UL 372, UL 1998 and CSA C22.2. GOST / Rostechnadzor
DUNGS Double Solenoid Valve DMV 5065/11 eco
Mar 12, 2022
View Full Size
Max. Operating pressure: 500 mbar
Nominal diameter: DN 65
Approvals: EN 161
Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2 S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2.
- Two A valves in one housing
- Double seat valves
- High flow rates
- Max. operating pressure up to 0.5 bar (50 kPa)
- Fast closing
- Fast opening (DMV/11 eco, DMV-D/11 eco)
- Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco)
DC solenoid
- Low electric power consumption through power switching
- Mountable closed position signal contact
- Compact, light-weight
Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
Approvals in other important gas consuming countries.
Nominal diameter: DN 65
Approvals: EN 161
Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2 S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2.
- Two A valves in one housing
- Double seat valves
- High flow rates
- Max. operating pressure up to 0.5 bar (50 kPa)
- Fast closing
- Fast opening (DMV/11 eco, DMV-D/11 eco)
- Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco)
DC solenoid
- Low electric power consumption through power switching
- Mountable closed position signal contact
- Compact, light-weight
Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
Approvals in other important gas consuming countries.
DUNGS Double Solenoid Valve DMV 5125/11 eco #250365
Mar 12, 2022
View Full Size
Max. Operating pressure: 500 mbar
Nominal diameter: DN 125
Approvals: EN 161
Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2 S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2.
- Two A valves in one housing
- Double seat valves
- High flow rates
- Max. operating pressure up to 0.5 bar (50 kPa)
- Fast closing
- Fast opening (DMV/11 eco, DMV-D/11 eco)
- Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco)
DC solenoid
- Low electric power consumption through power switching
- Mountable closed position signal contact
- Compact, light-weight
Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
Approvals in other important gas consuming countries.
Nominal diameter: DN 125
Approvals: EN 161
Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2 S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media.
The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2.
- Two A valves in one housing
- Double seat valves
- High flow rates
- Max. operating pressure up to 0.5 bar (50 kPa)
- Fast closing
- Fast opening (DMV/11 eco, DMV-D/11 eco)
- Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco)
DC solenoid
- Low electric power consumption through power switching
- Mountable closed position signal contact
- Compact, light-weight
Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
Approvals in other important gas consuming countries.
DUNGS MBE GasMultiBloc® - Latest Double Solenoid Valve
Mar 12, 2022
View Full Size
Increased Lifetime
Increased Plant Availability
Worldwide Approvals
From Analog to Digital
Increased Plant Availability
Worldwide Approvals
From Analog to Digital
- Soft opening and closing - constant by electronic and constant under all conditions
- Software regulated - BUS communication & Adaptive damping
- Extended temperature range (- 20 deg C to 60 deg C)
- Universal power supply
- Lower power consumption
MEDENUS Safety Relief Valve SL10 for HYDROGEN APPLICATION
Mar 2, 2022
View Full Size
The safety relief valve SL 10 is mainly used to blow off a small amount of gas when the pressure is slowly increasing and to avoid that the safety shut-off valves releases.
The safety relief valve SL 10 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request). The SL 10 is available with thread connections Rp 1'', Rp 1,5'', Rp 2'' and blow off pressure up to 3,5 bar. All safety relief valves are certified by DVGW and CE.
The safety relief valve SL 10 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request). The SL 10 is available with thread connections Rp 1'', Rp 1,5'', Rp 2'' and blow off pressure up to 3,5 bar. All safety relief valves are certified by DVGW and CE.
Gas Pressure Regulator for HYDROGEN Up to 16 bar!
Mar 2, 2022
View Full Size
Our gas regulator from MEDENUS for Hydrogen application.
The specific pressure and tightness test for hydrogen applications is done at MEDENUS with helium as the test medium.
The results of investigations by RWTH Aachen have shown that the alloys used by us can be used without restrictions for dry hydrogen up to an inlet pressure of 16 bar and represent an attractive alternative to conventional steel/cast iron and copper materials. Additional advantages are their substantially reduced weight, thus giving better handling and a higher corrosion class (C5-I) even without painting.
The alloys that were examined are used at MEDENUS not only for spring-loaded (R and RS series) but also for pilot-controlled gas pressure regulators (RSP series), cellular gas filters (DF 100 series), and safety relief valves (SL 10 series) in all nominal widths up to DN 200.
To know more, do contact us!
The specific pressure and tightness test for hydrogen applications is done at MEDENUS with helium as the test medium.
The results of investigations by RWTH Aachen have shown that the alloys used by us can be used without restrictions for dry hydrogen up to an inlet pressure of 16 bar and represent an attractive alternative to conventional steel/cast iron and copper materials. Additional advantages are their substantially reduced weight, thus giving better handling and a higher corrosion class (C5-I) even without painting.
The alloys that were examined are used at MEDENUS not only for spring-loaded (R and RS series) but also for pilot-controlled gas pressure regulators (RSP series), cellular gas filters (DF 100 series), and safety relief valves (SL 10 series) in all nominal widths up to DN 200.
To know more, do contact us!
Needle Valve - Micrometric Regulation Needle Valves
Mar 2, 2022
View Full Size
- to guarnatee an accurate regulation of the flow in the pipeline
- by manually rotating the tap is possible to regualte the orifice opening area which is accurately adjsuted by a conical shutter
- suitable for non corrosive gas and liquif fluids
- by manually rotating the tap is possible to regualte the orifice opening area which is accurately adjsuted by a conical shutter
- suitable for non corrosive gas and liquif fluids
We Are Now Authorized Distribution for : JASTA-ARMATUREN GmbH & Co.KG
Feb 12, 2022
View Full Size
Throttle and control valves for industrial ventilation systems for all temperature and pressure ranges!
- High Performance Valves
- Bespoke Valves - special design produced accroding to your specifications
- Allround valves - all regular applications
