The protocol converters connect the RFID reading devices KC-LG16M of the MOLOScode system with a PROFIBUS- or PROFINET-network and assume the task of a interface adapter. These protocol converters operate as a 100% network slave. Equiped with the MOLLET configuration this protocol converter translates the serial reading device interface into the PROFIBUS-DP or PROFIBUS-PN standard. Protocol converter PROFIBUS-DP Order code: KC-AB-RS485-DP MOLLET configuration RFID RS485 Translates serial interface RS 485 into PROFIBUS-DP format Power supply 24 V DC (+/- 10%) Current consumption <300 mA, typical 100 mA Transfer rate 9600 Baud Ambient temperature -5 °C ... +55 °C Mounting with top hat rail Weight 150 g Any mounting position Protection class IP20 according DIN EN 60529 No maintanance DOWNLOAD: Operating instruction Protocol converter PROFINET-PN Order code: KC-AB-RS485-PN MOLLET configuration RFID RS485 Translates serial interface RS 485 into PROFINET-PN format Power supply 24 V DC (+/- 10%) Current consumption <200 mA, typical 100 mA Baud rate 10/100 Mbit/s Ambient temperature -5 °C ... +55 °C Mounting with top hat rail Weight 150 g Any mounting position Protection class IP20 according DIN EN 60529 No maintanance DOWNLOAD: Operating instruction read more

With the float switch MOLOSswim TA the level of liquids can be easily indicated or monitored. It can be used as contact mechanism for a minimum, maximum, filling or discharging signal or for protection against run-dry or over flow.     Product features no condensation due to special sealing very good price-performance-ratio use in aggressive liquids although possible high reliability maintenance-free continuous operation easy installation no supply voltage necessary easy determination of switching point with sinker positioning Material Housing ABS, grey   Cable PVC, green   Weight Stainless steel 1.4305 Temperature range -5 °C ... +60 °C   Signal contact   potential-free change-over contact   Switching capacity 4A / 250V AC   Switching voltage 24V…250V AC or 12V...125V DC   Protection class IP68 acc. DIN EN 60529 Cable 3x1 mm² Diameter 6,8 mm Cable length 2m, 5m, 10m or 20m   Uplift 0,5   Maintenance none read more

The MOLOSpendu monitoring device PS is an universal rod-switch with versatile using capabilities. For example it can be used as robust limit switch, as counter for sacks on conveyor belts or for monitoring of bulk solids in motion.   Product features Reliable monitoring of moved bulk solids Versatile using capabilities Good price-performance-ratio Easiest installation No operating energy necessary Material Housing GAL, RAL 7001 coated   Flange Steel galvanized   Folding bellows NBR, black   Pendulum rod NBR, black with aluminium core Overpressure safety up to 0.5 bar   Ambient temperature -20 °C ... +70 °C Bulk goods temperature -25 °C ... +80 °C Signal contact change-over contact potential-free Switching voltage 24V…250V AC or 12V...125V DC   Capacity of the contact 6A / 250V AC   Mounting position any     Maintenance none   read more

The PF is a full indicator for powdery, granulated, and grainy bulk goods and preferred for mechanically filled silos and containers. The simple design enables a reliable and very price worth level indication.   Product features very good price-performance-ratio use in dust and gas explosive hazardous areas possible high reliability maintenance-free continuous operation easy installation no supply voltage necessary innovative protection against buckling Material Housing IP66 Aluminium   Folding bellows NBR   Bend protection Stainless steel   Rod and cone Aluminium or stainless steel ATEX-Approval DustEx ATEX II 1/2D Ex ta/tb IIIC T80°C   DustEx and GasEx ATEX II 1/2D Ex ta/tb IIIC T80°C and II 2G Ex ib IIB T6 Process pressure -50 mbar ... 50 mbar Overpressure safety up to 0.5 bar   Ambient temperature -20 °C ... +70 °C Bulk goods temperature -25 °C ... +80 °C Signal contact potential-free change-over contact For most applications including potentially dust explosive atmospheres:     > Switching voltage 24V…250V AC or 12V...125V DC   > Switching capacity 4A / 250V AC   For potentially gas explosive atmospheres:     > Switching voltage Ui < 30V (intrinsic safe)   > Switiching capacity Ii < 0,1A (intrinsic safe)   Mounting position vertical   Maintenance none   read more