GAS GAS solenoid valves have been designed to be combined with any gas detection system. Shut off the main outlet when an emergency situation is detected. They have been installed at the gas piping and connected with a gas detector. Interrupt the gas flow in a danger situation. The electro-valve is normally located after a filter, upstream of the regulation apparatus and preferably outside the measurement zone. It has been installed with the arrow stamped on the body turned towards the user appliance. To reset the solenoid valve pull the reset knob.   0497     Standard Specification: Power supply: 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca Body: brass, yellow colour Working temperature: -15°C / +70°C Closing time: < 1 sec Max pressure: 550 mbar Protection level: IP65 Connections: ISO 228/1 thread   TYPE CONNECTION FLOW POWER A MM B MM POWER SUPPLY VR709 1/2'' 4,5 (mc/H) 19 W 65 125 12Vcc VR500 ½” 4,5 (mc/H) 17 VA 65 125 230Vac VR710 ¾” 6 (mc/H) 19 W 65 125 12Vcc VR510 ¾” 6 (mc/H) 17 W 65 125 230Vac VR711 1” 6 (mc/H) 19 W 78 130 12Vcc VR520 1” 6 (mc/H) 17 VA 78 174 230Vac VR530/12 1”¼ 40 (mc/H) 19 W 114 174 12Vcc VR530 1”¼ 40 (mc/H) 17 VA 114 174 230Vac VR540/12 1” ½ 50 (mc/H) 19 W 114 174 12Vcc VR540 1”½ 50 (mc/H) 17 VA 114 174 230Vac VR550/12 2'' 80 (mc/H) 19 W 139 182 12Vcc VR550 2'' 50 (mc/H) 17 VA 139 182 230Vac read more

Automatic gas solenoid valves are used for safety and control of gas for shut-off in gas feed pipes. Suitable for various gasses, including Natural gas, Propane and LPG Gas solenoid valve normally closed solenoid that open automatically when the coil is powered and close automatically when there is no tension. 0497    Standard Specification: Pmax 360 mbar - 6 bar Inlet connection Thread gas ½'' ¾'' and 1'' - ISO 228 Outlet Thread gas ½'' ¾'' and 1'' - ISO 228 Opening time <1 second Closing time <1 second Max number of operations 20 per minute Incorporated AISI 303 steel mesh filter Supply voltage 230V (-15%+10%) 50-60Hz 110V (-15%+10%) 50-60Hz 24Vdc (-15%+10%) 50-60Hz Power 15 VA - 24 VA for 6 bar version Coils to class F copper wire class H Use Non – aggressive gases – Family 1 – 2 – 3 and air Test point Screw ¼'' NPT CPI On request Working Temperature - 20 °C – 60 °C Approval EN161 Protection degree IP65 Materials: Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100 TYPE DIMENSIONS DESCRIPTION P MAX AV015FO ½” Gas valve fast opening 360 mbar AV020FO ¾” Gas valve fast opening 360 mbar AV025FO 1” Gas valve fast opening 360 mbar AV015FO-FR ½” Gas valve fast opening Flow regulation 360 mbar AV020FO-FR ¾” Gas valve fast opening Flow regulation 360 mbar AV025FO-FR 1” Gas valve fast opening Flow regulation 360 mbar AV015FO-6B ½” Gas valve fast opening 6 bar AV020FO-6B ¾” Gas valve fast opening 6 bar AV025FO-6B 1” Gas valve fast opening 6 bar AV015FO-FR–6B ½” Gas valve fast opening Flow regulation 6 bar AV020FO-FR–6B ¾” Gas valve fast opening Flow regulation 6 bar AV025FO-FR–6B 1” Gas valve fast opening Flow regulation 6 bar read more

Gas filters designed in accordance with the provisions of DIN.3386 standards can be used for all the types of natural gas, LPG or not corrosive gases. These filters are widely used for protection of control devices, pressure regulators, meters and on systems that requiring an high degree of filtration. All the filter covers are filled with connections for test point both at the filter inlet and outlet.   0497     Standard Specification: Operation maximum pressure 6 bar Working Temperature - 20 °C – + 60 °C Filtration ≤ 50 Micron Use Non – aggressive gases – Family 1 – 2 – 3 and air Special version for Biogas Cartridge element Plastic cartidge PP Connection ½'' – ¾'' – 1'' Wall boiler – ISO 228 Complete Body Die – Cast Aluminium Gd – AlSi12Cu – EN AB 46100 Seals NBR   YPE DIMENSIONS DESCRIPTION P MAX GF015SC ½” Gas filter small capacity 6 bar GF020SC ¾” Gas filter small capacity 6 bar GF025SC 1” Gas filter small capacity 6 bar   read more

Spring-loaded governors, are designed and built according UNI EN 88 class A - group 2 specifications, can be used for all the types of natural gas LPG or not corrosive gases . These regulators are widely used in supply lines for mixed and combinated burners and in the piped distribution of methane gas and LPG in both industrial and non-industrial applications. Spring-loaded/ governors are self-acting type with balanced obturator and double safety diaphragm. The double diaphragm allow to use the device within the cabinet, without connecting an external pipe venting. (Point 3.3.2 of UNI EN 88 regulation). All regulators have internal sensing line and inlet/outlet pressure test point 0497  Standard Specification: Pmax inlet max - 500 mbar Setting outlet 10 - 300 mbar - Standard spring supplied 10-27 mbar  Other spring on request Filtering <=50um - Plastic cartidge Inlet - Outlet Thread gas 1/2'', 3/4'', 1'' - ISO 228 Connection DN25 - Sliding Aluminium flange PN10 Test point Inlet / outlet on request . Test point 1/8h NPT Working Temperature - 20° C -+ 60° C Use Not aggressive gases of three families - Natural Gas - LPG - Town Gas Approval UNI EN 88-1:2011 - PED   Materials: Complete Body Die – Cast Aluminium Gd – AlSi12Cu – EN AB 46100 Diaphragms NBR 60Sh – DvGW EN 549 Plastic components Yellow POM / Pa 66 + 25% Gf Option: Color: White Range: 5 - 14 mbar Color: Yellow Range: 6 - 22 mbar Color: Neutral Range: 10 - 27 mbar Color: Red Range: 28 - 70 mbar Color: Black Range: 60 - 130 mbar Color: Blue Range: 120 - 300 mbar If you want test point in and out pls add code TPIO at the end of the code. TYPE DIMENSIONS DESCRIPTION P MAX RG015 ½” Gas Governor 500 mbar RG020 ¾” Gas Governor 500 mbar RG025 1'' Gas Governor 500 mbar RGD25 DN25 Gas Governor 500 mbar RG015-FT ½” Gas Governor with filter 500 mbar RG020-FT ¾” Gas Governor with filter 500 mbar RG025-FT 1” Gas Governor with filter 500 mbar RGD25-FT DN25 Gas Governor with filter 500 mbar read more

read more

read more

read more

We supply whole range of gas components from GECA Italy .  read more

VDC duct burner 300 KW Bruciatori Industriali Santin read more