METREG ELECTRONIC TURBINE METERS MQME (QUANTOMETER)

METREG  ELECTRONIC TURBINE METERS MQME  (QUANTOMETER)

METREG ELECTRONIC TURBINE METERS MQME (QUANTOMETER)

The MQMe quantometer is based on the principle of a turbine flow meter with an integrated electronic index head. The MQM is designed for flow and volume measurement for natural gas, nitrogen, air (and other gases on request) in non-custody transfer and process applications. The MQM is available in sizes from DN 25 (1´´) to DN 150 (6´´) with a volume flow rate up to 1600 m3/h depending on meter size. The meter housing is made of high strength aluminum. Itis designed as a sandwich construction (installed between two flanges). A volume correction function (AGA NX-19) can be optionally integrated in the electronic index head. Several communication options are available for data transmission: RS 485, M-Bus, Modbus, HF and LF signal as well as a 4 to 20 mA output. On a standard basis the MQMe meter is battery powered with a calculated battery life time of 5 years under standard conditions. 

Characteristics

  • several options to transmit the measured an calculated data to a digital control system (DCS) or SCADA
  • equipped with alternatively RS 485 or M-Bus interface and one high frequency (HF) as well as one low frequency (LF) pulser
  • if an external power supply is connected to the MQME one 4 to 20 mA configurable signal is available
  • the rotation of the rotor can be scannes additionally with one external high frequency (HF) sensor
  • the HF-sensor signal allows the determination of the actual gas flow in high-resolution and can be transmit to any digital control system (DCS) or SCADA for flow control purposes
  • integrated electronic volume corrector

Options

  • WFactory calibration measuring range 1:20
  • integrated volume corrector (incl. pressure & temperature sensors)
  • analog output (4-20 mA, 24 VDC needed)
  • RS485 (M-bus not possible)
  • M-Bus (RS485 not possible)
  • additional HF sensor (external power supply needed)
  • Oil pump
  • 1x thermowell
  • Test certificate 3.1 with detailed materials list
Sizes: 1' (DN25) to 6' (DN150)
Connections:  
Materials: Meter body anodized aluminium / Meter head made of polymer material or aluminium (optional)
Flow Rates: 16 to 1600 m³/h
Medium: Gas
Pressure Class: PN10/PN16 or ANSI Class 150
Temperature:  
Approvals: PED and ATEX (zone 1)
Notes: (a) Horizontal or vertical mounting position (b) Maintenance free based on permanent lubrication (c) Protection class IP65

Download Files

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Call Us Now!

+603-8071 8844
+603-8071 7642
+60126756853
+60126756853

http://www.lsaenergy.com

 

 
SOCIAL MEDIA
 
Switch to Mobile Version
Recent Updates
Subscribe Newsletter