News & Events

DUNGS MPA4112 V1.1 Automatic Burner Control

Mar 12, 2022
DUNGS MPA4112 V1.1 Automatic Burner Control
View Full Size
Microprocessor-controlled automatic gas burner control for intermittent and continuous operation of one-stage atmospheric burners or one-stage or modulating fanned burners. The program sequence and times can be customised by setting software parameters

Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive

FM Approved to FM 761
UL Recognized Component per UL 372, UL 1998 and CSA C22.2. GOST / Rostechnadzor

DUNGS Double Solenoid Valve DMV 5065/11 eco

Mar 12, 2022
DUNGS Double Solenoid Valve DMV 5065/11 eco
View Full Size
Max. Operating pressure: 500 mbar
Nominal diameter: DN 65
Approvals: EN 161

Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2 S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2.
- Two A valves in one housing
- Double seat valves
- High flow rates
- Max. operating pressure up to 0.5 bar (50 kPa)
- Fast closing
- Fast opening (DMV/11 eco, DMV-D/11 eco)
- Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco)
 DC solenoid
- Low electric power consumption through power switching
- Mountable closed position signal contact
- Compact, light-weight

Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
Approvals in other important gas consuming countries.

DUNGS Double Solenoid Valve DMV 5125/11 eco #250365

Mar 12, 2022
DUNGS Double Solenoid Valve DMV 5125/11 eco #250365
View Full Size
Max. Operating pressure: 500 mbar
Nominal diameter: DN 125
Approvals: EN 161

Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2 S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting.
- Automatic shut-off valves as per DIN EN 161 Class A Group 2.
- Two A valves in one housing
- Double seat valves
- High flow rates
- Max. operating pressure up to 0.5 bar (50 kPa)
- Fast closing
- Fast opening (DMV/11 eco, DMV-D/11 eco)
- Adjustable main volume (DMV-D/11 eco, DMV-DLE/11 eco)
 DC solenoid
- Low electric power consumption through power switching
- Mountable closed position signal contact
- Compact, light-weight

Approvals
EC type testing certificate as per:
• EC-Gas Appliances Regulation
• EC-Pressure Equipment Directive
Approvals in other important gas consuming countries.

DUNGS MBE GasMultiBloc® - Latest Double Solenoid Valve

Mar 12, 2022
DUNGS MBE GasMultiBloc® - Latest Double Solenoid Valve
View Full Size
Increased Lifetime
Increased Plant Availability
Worldwide Approvals 

From Analog to Digital
  • Soft opening and closing - constant by electronic and constant under all conditions
  • Software regulated - BUS communication & Adaptive damping
  • Extended temperature range  (- 20 deg C to 60 deg C)
  • Universal power supply 
  • Lower power consumption
Contact us for more information!

MEDENUS Safety Relief Valve SL10 for HYDROGEN APPLICATION

Mar 2, 2022
MEDENUS Safety Relief Valve SL10 for HYDROGEN APPLICATION
View Full Size
The safety relief valve SL 10 is mainly used to blow off a small amount of gas when the pressure is slowly increasing and to avoid that the safety shut-off valves releases.

The safety relief valve SL 10 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request). The SL 10 is available with thread connections Rp 1'', Rp 1,5'', Rp 2'' and blow off pressure up to 3,5 bar. All safety relief valves are certified by DVGW and CE.

Gas Pressure Regulator for HYDROGEN Up to 16 bar!

Mar 2, 2022
Gas Pressure Regulator for HYDROGEN Up to 16 bar!
View Full Size
Our gas regulator from MEDENUS for Hydrogen application.
The specific pressure and tightness test for hydrogen applications is done at MEDENUS with helium as the test medium.

The results of investigations by RWTH Aachen have shown that the alloys used by us can be used without restrictions for dry hydrogen up to an inlet pressure of 16 bar and represent an attractive alternative to conventional steel/cast iron and copper materials. Additional advantages are their substantially reduced weight, thus giving better handling and a higher corrosion class (C5-I) even without painting.

The alloys that were examined are used at MEDENUS not only for spring-loaded (R and RS series) but also for pilot-controlled gas pressure regulators (RSP series), cellular gas filters (DF 100 series), and safety relief valves (SL 10 series) in all nominal widths up to DN 200.

To know more, do contact us!

Needle Valve - Micrometric Regulation Needle Valves

Mar 2, 2022
Needle Valve - Micrometric Regulation Needle Valves
View Full Size
- to guarnatee an accurate regulation of the flow in the pipeline
- by manually rotating the tap is possible to regualte the orifice opening area which is accurately adjsuted by a conical shutter
- suitable for non corrosive gas and liquif fluids 

We Are Now Authorized Distribution for : JASTA-ARMATUREN GmbH & Co.KG

Feb 12, 2022
We Are Now Authorized Distribution for : JASTA-ARMATUREN GmbH & Co.KG
View Full Size
Throttle and control valves for industrial ventilation systems for all temperature and pressure ranges!
  • High Performance Valves
  • Bespoke Valves - special design produced accroding to your specifications
  • Allround valves - all regular applications
Contact us for more information!

ARIS Nano S Actuator 230V, 50-60 Hz

Feb 8, 2022
ARIS Nano S Actuator 230V, 50-60 Hz
View Full Size
  • 30s/90 degree
  • 15 Nm
  • IP65

DUNGS Proportional Pressure Regulator FRNG 503 Rp3/8

Feb 8, 2022
DUNGS Proportional Pressure Regulator FRNG 503 Rp3/8
View Full Size
#220968
Pmax 500mbar, 3/8''

Spring-loaded pressure regulator with adjustable setpoint spring and defined counterspring. Internal tap of regulator output pressure, external pulse and blower pressure connections prepared. Suitable for controlling regulator output pressure via a pneumatic command variable.

Ushering Into Year 2022 with Our Newly Transformed Office!

Feb 4, 2022
Ushering Into Year 2022 with Our Newly Transformed Office!
View Full Size
Our newly transformed multipurpose office, with integrated workshop and store, to better serve our client.
Do contact us for more product information and we welcome your enquiry! 
Contact us :+603-80718844 to get in touch. 

ECONEX Electronic Rotary Gear Motor AB1 Series

Feb 4, 2022
ECONEX Electronic Rotary Gear Motor AB1 Series
View Full Size
  • AB1 actuators  are particularly suitable for the control and regulation of modulating valves, butterfly valves, dampers and other fluid regulation systems requiring an angular positioning within 90° or 180°.
  • The AB1 motor is unipolar and bidirectional with high static and maintaining torque, can operate on 3-position in the electric version or be piloted by analogical input signal in current or voltage in the electronic version
  • Actuators of series AB1 have the certificate and EMC Electromagnetic Compatibility.

Call Us Now!

+603-8071 8844
+603-8071 7642
+60185765168

http://www.lsaenergy.com

 

 
 
 
SOCIAL MEDIA
 

Switch to Mobile Version
Recent Updates
Subscribe Newsletter